Materials In Vacuum Kurt Feltenberger (01 Nov 2017 02:03 UTC)
Re: [TML] Materials In Vacuum Tim (01 Nov 2017 03:34 UTC)
Re: [TML] Materials In Vacuum Grimmund (01 Nov 2017 13:55 UTC)
Re: [TML] Materials In Vacuum Bruce Johnson (01 Nov 2017 16:04 UTC)
Re: [TML] Materials In Vacuum C. Berry (01 Nov 2017 17:51 UTC)
Re: [TML] Materials In Vacuum C. Berry (01 Nov 2017 21:27 UTC)
Re: [TML] Materials In Vacuum Kelly St. Clair (01 Nov 2017 23:49 UTC)
Re: [TML] Materials In Vacuum Richard Aiken (02 Nov 2017 05:15 UTC)
Re: [TML] Materials In Vacuum Kelly St. Clair (02 Nov 2017 06:52 UTC)
Re: [TML] Materials In Vacuum C. Berry (02 Nov 2017 19:52 UTC)
Re: [TML] Materials In Vacuum C. Berry (02 Nov 2017 19:48 UTC)
Re: [TML] Materials In Vacuum Rupert Boleyn (02 Nov 2017 23:27 UTC)
Re: [TML] Materials In Vacuum Rupert Boleyn (02 Nov 2017 23:23 UTC)
Re: [TML] Materials In Vacuum C. Berry (02 Nov 2017 23:48 UTC)
Re: [TML] Materials In Vacuum shadow@xxxxxx (04 Nov 2017 21:38 UTC)
Re: [TML] Materials In Vacuum Bruce Johnson (06 Nov 2017 14:34 UTC)
Re: [TML] Materials In Vacuum Grimmund (08 Nov 2017 19:41 UTC)
Re: [TML] Materials In Vacuum shadow@xxxxxx (09 Nov 2017 11:37 UTC)
Re: [TML] Materials In Vacuum shadow@xxxxxx (04 Nov 2017 21:38 UTC)

Re: [TML] Materials In Vacuum Kelly St. Clair 02 Nov 2017 06:51 UTC

On 11/1/2017 10:15 PM, Richard Aiken wrote:
> On Wed, Nov 1, 2017 at 7:49 PM, Kelly St. Clair <xxxxxx@efn.org
> <mailto:xxxxxx@efn.org>> wrote:
>
>
>     Pity the hulls probably wouldn't be close enough for naked-eye
>     observation; spoils the visual of a dozen starships all slowly
>     rotating like kebab rotisseries.
>
>
> Why *not* put them inside easy reach of each other? Doing that would
> make them a lot easier to visit when necessary.

In space, naked-eye ranges aren't just "inside easy reach", they're
"practically /touching/".  You might, at best, be able to make out a
constellation of other points of light against the starfield, gradually
brightening and dimming as they reflect more or less light in your
direction.

--
---------------
Kelly St. Clair
xxxxxx@efn.org